Medicube AGE-R Booster Pro review: worth it only if you'll use all four modes
Updated October 22, 2026
Buy the Medicube AGE-R Booster Pro only if you want all four of its modes, especially the microcurrent and EMS modes Medicube positions for a more defined-looking face, and you'll use it several times a week with the serum and cream you already own. If what draws you is Booster Mode, the part that helps skincare absorb, the Medicube AGE-R Booster Pro Mini does that one job for $73.99, about 30% of the Pro's $244.99 price.
Neither device replaces a good serum or moisturizer. The Medicube AGE-R Booster Pro in Black is out of stock at Sleepy Hello as of October 2026, while the Mini is available.
This is a researched review of current US brand and retailer information, checked October 2026. We haven't used or tested either device; descriptions of what each mode does are Medicube's, and the buying advice comes from comparing modes, directions, box contents and prices.
What does the Medicube Booster Pro do?
The Booster Pro is a handheld facial device that combines six functions, which Medicube lists as electroporation, microcurrent, EMS, Air Shot technology, LED and sonic vibration. You don't pick those functions directly. You pick one of four modes, and each mode has its own job and its own skincare layer:
Air Shot: used on clean, completely dry skin, before any product. Medicube says it supports smoother-looking texture and a more refined pore appearance. Its US page says Air Shot creates tiny pathways on the skin's surface to help ingredients absorb, and that the mode activates with one point of contact.
Booster Mode: uses electroporation, the same technology the Mini relies on, and Medicube's Mini listing describes it as creating temporary fine openings that help applied skincare absorb. You use it over a light serum or ampoule, and it's the mode the device is named for.
MC Mode: uses microcurrent, a very low electrical current, over a richer cream or gel. Medicube says it supports a bouncier, plumper look, especially around the eyes and mouth.
Derma Shot: uses EMS (electrical muscle stimulation) with slow movements and short pauses. Medicube positions it for facial definition and balance around areas such as the cheekbones and jawline.
The device also has five LED colors, preset by mode, plus sonic vibration; the optional AGE-R app changes the LED color, vibration and volume. Medicube doesn't describe a separate skin benefit for the Pro's LED colors on our listing or its US page, and on the Mini it says plainly that the lights are indicators only.
Medicube publishes one-use measurements it attributes to the Global Institute of Dermatological Sciences, including a 763.3% boost in skin absorption efficiency and a 34.6% reduction in the appearance of pores. The pages don't give the study size or method, so we read those figures as brand claims, and we found no independent study of this device in the sources we checked. The claims are cosmetic, and nothing on the page compares it with an in-office procedure.
How do you use the Medicube Booster Pro?
Start at level 1, then run the modes in the order Medicube gives: Air Shot on dry skin, Booster Mode over a serum, then MC Mode and Derma Shot over a cream or gel. The order matters when you combine modes.
Cleanse and dry your face completely. Use Air Shot first: lightly touch the edge of the head to your skin and sweep outward in one direction, using the tip around the nose and chin. Medicube limits this mode to 5 minutes, 2 to 3 times a week.
Apply a light serum or ampoule, then switch to Booster Mode. Keep the head on your skin and roll it in circles, glide outward, or pause on one spot for 1 to 2 seconds before moving on.
Apply a richer cream or gel, then use MC Mode, keeping contact and moving upward from the inner face outward.
With that cream still on your skin, use Derma Shot: move slowly in full contact, pause for 1 to 2 seconds at chosen points, then continue outward.
Booster, MC and Derma Shot can each be used for 5 to 10 minutes per session, 1 to 3 times a day, adjusted to how your skin feels. Stay at level 1 around the thinner skin near the eyes, nose and mouth. Medicube also says not to use the device on open wounds, the front of the neck, or areas that have had a procedure or surgery, and to stop immediately if you feel pain or anything unusual.
Two details from Medicube's US product page are easy to miss. Retinol or vitamin products may cause stronger irritation when used with the device, so the brand suggests starting with basic skincare and dropping to the lowest level when you add them. And if there's a lot of product on the head, the central LED can switch on without skin contact, so keep it away from your eyes; the app can turn the LED off.
Our take: those maximums are generous. Two or three sessions a week, adding one mode at a time, makes it easier to tell which step your skin likes.
What products should you use with the Medicube Booster Pro?
Use the serum and moisturizer you already like. The Booster Pro doesn't need a special conductive gel, and no serum, cream or gel comes in the box. What matters is texture: a light serum or ampoule for Booster Mode, and a richer cream or gel for MC Mode and Derma Shot so the head glides.
Medicube's US device page doesn't name specific products to pair with it. If you'd like to stay within the brand, two stocked Medicube formulas match those textures:
A light serum for Booster Mode:Medicube PDRN Pink Peptide Serum, 30 ml, $20.99. Its ingredient list opens with water, glycerin, dipropylene glycol, isopropyl myristate, glycereth-26 and niacinamide, followed by 1,2-hexanediol and sodium DNA, the salmon-derived PDRN ingredient, with sodium hyaluronate and five peptides further down. Medicube describes it as lightweight and suggests 2 to 3 drops.
A gel for MC Mode and Derma Shot:Medicube Collagen Jelly Cream, 50 ml, $13.99, or the larger Collagen Niacinamide Jelly Cream, 110 ml, $21.99, whose ingredient list opens the same way. It's a jelly-gel moisturizer that starts with water, propanediol, dipropylene glycol, butylene glycol and methylpropanediol, with niacinamide, trehalose and hydrolyzed collagen a little further down.
What to hold back at first: retinol and vitamin products, because of the brand's irritation note. We'd also keep exfoliating acids out of device sessions until you know how your skin responds, then add one product at a time at level 1.
What is the difference between the Booster Pro and the Booster Pro Mini?
The Pro has four modes and six functions; the Mini does one thing, electroporation for absorption, at a much lower price. Side by side, from the two Sleepy Hello listings checked October 2026:
Modes: the Pro has Air Shot, Booster, MC and Derma Shot. The Mini uses electroporation only, with five adjustable intensity levels. Medicube doesn't publish how many intensity levels the Pro has.
Lights: the Pro has five LED colors preset by mode. The Mini has two selectable color modes, and Medicube says those LEDs are indicators with no separate effect.
App: the Pro works with the optional AGE-R app over Bluetooth for guided care and usage reports. The Mini's listing doesn't mention an app.
Weight: the Mini weighs 75 g. Medicube doesn't publish the Pro's weight on the pages we checked.
In the box: the Pro comes with a user manual and a USB charging cable. The Mini comes with its manual only; you supply a USB Type-C cable and a charger with DC 5 V input at up to 2 A, and there's no head cover case.
Price: $244.99 for the Pro, out of stock at Sleepy Hello in October 2026, and $73.99 for the Mini, in stock. That's a $171 difference.
Pick the Mini if you mainly want a more involved serum step; it glides over a well-hydrated serum, cream, gel or mask for 5 to 10 minutes a session. Pick the Pro if the microcurrent and EMS modes are the reason you're shopping, because the Mini has neither.
A third device is easy to confuse with these two. The Medicube AGE-R Ultra Tune 40.68 pairs 40.68 MHz radio frequency with microcurrent for a firmer-looking face and costs $397.99, also out of stock in October 2026. It's used after your skincare has fully absorbed, not over a fresh serum, so it's a firmness tool rather than an absorption tool.
How do you clean the Medicube Booster Pro?
Wipe the head thoroughly with a dry cloth or cotton pad after each session, and keep water and cosmetics out of the main unit. That instruction comes from Medicube's directions for the Mini. Neither the Sleepy Hello Pro listing nor Medicube's US Pro page publishes a cleaning step for the Pro, so the printed manual in the box is the final word.
Because the Pro is used over serum and cream, product builds up on its surgical-steel head, and Medicube notes that a heavily coated head can trigger the central LED without skin contact. A quick dry wipe between modes, not only at the end, helps.
Medicube doesn't publish a water-resistance rating, charge time or battery life for the Pro on the pages we checked. Until the manual says otherwise, don't rinse it under the tap or soak it, and charge it with the included USB cable.
Is the Medicube Booster Pro worth it?
It's worth it for a fairly narrow reader: someone who wants a contour-focused step (MC Mode and Derma Shot) as well as absorption, and who will put in 10 to 20 minutes several times a week. For everyone else, the Mini, or no device at all, is the better value.
The cost per session only looks reasonable with regular use. At three sessions a week for a year, $244.99 works out to about $1.57 a session, against about 47 cents for the Mini at $73.99. Used once a month, the Pro costs roughly $20 a session over its first year.
You'd likely get little from it if:
you're hoping for lifting comparable to an in-office procedure, which Medicube doesn't claim;
your skin is easily irritated, broken or recovering from a procedure, since every mode needs undamaged skin;
your routine centers on retinol or vitamin products, which the brand says may irritate more with the device;
you won't keep up several sessions a week;
you're already happy with how your serum and moisturizer perform.
One more check before buying: Medicube's US page doesn't list who shouldn't use the device, for example during pregnancy or with an implanted electronic device such as a pacemaker. Read the manual and ask your doctor first if either applies to you.
Quick answers
Does the Medicube Booster Pro work?
Medicube publishes one-use results for absorption, pores and plumpness, but they're the brand's own figures and we found no independent study. Think of it as a structured way to apply your serum and cream.
Do you need a special gel for the Medicube Booster Pro?
No. Medicube says no dedicated conductive gel is required. Use a light serum or ampoule for Booster Mode and a richer cream or gel for MC Mode and Derma Shot.
How often can you use the Medicube Booster Pro?
Air Shot up to 2 to 3 times a week and the other three modes up to 1 to 3 times a day, starting at level 1, as set out in the usage section above.
Can you use the Booster Pro around your eyes?
Yes, Medicube includes the eye area, at level 1 only, and the same goes for the nose and mouth. Keep the LED out of your eyes and skip any area with an open wound.
Do you need the AGE-R app?
No. The device works without it. The app adds LED, vibration and volume controls, guided care and usage reports.
Use vitamin C serum in the morning after toner, before moisturizer and SPF. See whether it pairs with niacinamide, retinol and snail mucin, by formula.
How to use azelaic acid: apply after toner on dry skin, start once or twice a week and finish with SPF. Compare Anua, Medicube and Centellian24 10% serums.
